Technical Specification Plywood

Globe

USA - Germany - Brazil

Basic Technical Specifications: Plywood

Plywood

Available in many different Specifications:
All layers from rotary cut veneers (face rotary or
sliced) according to customer requirement.
Available in differnt grades, and veneer qualities.
...(any other specification upon request - generally
available)

wpe96.jpg (3797 bytes)

	STANDARD (Pine or similar)	STANDARD (Hardwood)
Quality:	A, B, C, D, E I, I/II, II/III C+/C	A, B, C, D, E I, I/II, II/III B/BB, BB/CC
Face/Back:	Rotary Cut Veneer or sliced	Rotary Cut Veneer or sliced
Interiors:	One Piece or joined	One Piece or joined
Sizes in cm/ft:	153x310 5' x 10' 170x310 5'5 x 10' 183x310 6' x 10' 170x250 5'5 x 8'2 250x125 8'2 x 4'1 244 x 122 8' x 4' or as requested + 6m (+20')	153x310 5' x 10' 170x310 5'5 x 10' 183x310 6' x 10' 170x250 5'5 x 8'2 250x125 8'2 x 4'1 244 x 122 8' x 4' or as requested + 6m (+20')
Thickness:	For Both: 4 up to 40 mm
Glue:	(E1), MR / WBP or as requested by the Customer
Bonding Method:	WBP or MR (E1)	WBP or MR (E1)
Density:	450-500 kg/m3	550-600 kg/m3
Moisture Content:	10 - 12 %	10 - 12 %

Long-Grain Multiply
A = Veneer Sheet

Cross-Grain Multiply
A = Veneer Sheet

3-Ply
A = Veneer Sheet

multipart.jpg (12488 bytes)

Multiply with Particleboard
A = Veneer Sheet
B = Particleboard

All sizes as requested by the customer. Special treatment or level of pre-fabrication upon request.

Back to Technoply Product Page Back to Multibras Product Page

Zurück zur Sperrholz Seite

info@wzinternational.com