Technical Specification Blockboard, Laminboard and Core

Globe

USA - Germany - Brazil

Basic Technical Specifications: Blockboard, Coreboard, Laminboard and Core

Blockboard

Available in 3 or 5 ply, with core sticks from Pine or Poplar, and Virola or Okoume Veneers, or any other requested wood species .....(any other specification upon request - generally available)

plyw.gif (22168 bytes)

	VIROLA or OKOUME	PINE or POPLAR
Quality:	B/BB	II/III
Face/Back:	Rotary Cut (or sliced u.r.)	Rotary Cut (or sliced u.r.)
Cores:	Pine, Poplar or Spruce	Pine, Poplar or Spruce
Sizes in cm / ft No. of Plies	244x122/3 or 5-ply 8' x 4' 183x250/3-ply 6' x 8' 170x305/3 or 5-ply 5'5 x 10' 183x305/3-ply 6' x 10' 184x515/3-ply 6' x16'9 205x520/3-ply 6'7 x 17' 150x660/3-ply 4'9 x 21'6 250x660/3-ply 8'2 x 21'6 300x660/3-ply 9'8 x 21'6	122x244/3-ply 4' x 8' 122x305/3-ply 4' x 10' 170x250/3-ply 5'5 x 8'2 170x305/3-ply 5'5 x 10' 184x515/3-ply 6' x 16'9 205x520/3-ply 6'7 x 17' 150x660/3-ply 4'9 x 21'6 250x660/3-ply 8'2 x 21'6 300x660/3-ply 9'8 x 21'6
Thickness:	For Both: 13, 16, 18, 19, 22, 25, up to 42 mm
Glue:	Urea-Formaldehyde MR (LFE-E1), or WPB, or as requested by the Customer
Density:	450-500 kg/m3	400-450 kg/m3
Moisture Content:	10 - 12 %	10 - 12 %

2 - 3 Layer Blockboard
A = Core
B = Veneer Sheet

1 - 5 Layer Blockboard
A = Core
B = Veneer Sheet

Double Core Blockboard
A = Core
B = Veneer Sheet

Decorative Blockboard

wpe8A.jpg (4561 bytes)

Available with Pine, Poplar or Spruce core
sticks, and coated with decorative, sliced
veneers from fine wood, such as Virola, Oak,
Eucalyptus, Ash, or tropical Hardwood,etc.
.......(any other specification upon request –
generally available)

Quality: A/B

Face Veneers: Sliced decorative veneers 0,5 – 0,6 mm

Base Panel: 3-ply Pine, Spruce or Okoume Blockboard

Cores: Pine, Poplar or Spruce

Sizes cm/ft + No. of Plies:
244x122/5-ply / 8' x 4'
250x183/5-ply / 8'2 x 6'
305x183/5-ply / 10' x 6'
515x184/5-ply / 16'9 x 6'
520x205/5-ply / 17' x 6'7

Thickness: 16, 18, 21, up to 54 mm

Glue: Urea-Formaldehyde MR (LFE-E1), or WBP, or as requested

Density: 450 – 500 kg/m3

Moisture Content: 10 – 12 %

Lumber Core

wpe8B.jpg (24492 bytes)

L    = Length of Board
W   = Width of Board
L1   = Length of Lath
W1 = Width of Lath
En = Nominal Thickness

All sizes as requested by the customer. Special treatment or level of pre-fabrication upon request.

Coreboard

wpe8C.jpg (7698 bytes)

Available with face and back from thin chip-
board (4 mm), and cores from Pine, Poplar or
Spruce sticks. ..(any other specification upon
request – generally available)

Sizes in cm:
244x122 / 8' x 4'
250x183 / 8'2 x 6'
305x183 / 10' x 6'
515x184 /16'9 x 6'
520x205 / 17' x 6'7

Thickness: 18, 19, 22, 25, up to 42 mm

Glue: Urea-Formaldehyde MR/E1 (LFE) or as requested

Density: 550 – 650 kg/m3

Moisture Content: 10 – 12 %

Laminboard

wpe8D.jpg (7059 bytes)

3 - ply board available with face and back
from rotary cut Pine, Virola, Okoume or Poplar
veneers, with cores made from parallel glued
rotary cut veneers of thickness between 3,3 –
4,5 mm (any other specification upon request –
generally available)

Sizes in cm:
110x431 / 3'6 x 14'
110x215 / 3'6 x 7'
122x244 / 4' x 8'
170x305 / 5'5 x 10'
170x366 / 5'5 x 12'
185x431 / 6' x 14'

Thickness: 16, 18, 22, up to 54 mm

Glue: MR, or as requested

Density: 450 – 550 kg/m3

Moisture Content: 10 – 12 %

Also available in Cores only, and special
dimensions upon request.

particle.jpg (10584 bytes)

Blockboard with Particleboard
A = Core
B = Veneer Sheet
C = Particleboard

laminate.jpg (15298 bytes)

Blockboard with HPL Laminate
A = Core
B = Veneer Sheet
C = HPL Laminate

TRIPLE Core Blockboard
A = Core
B = Veneer Sheet

Back to MAXIBLOCK Product Page

Zur�ck zur Tischlerplatten und Mittellagen Seite

info@wzinternational.com